WSJTX / FT-DX10 Settings for FT-8

  • WSJTX
    • General
      • Callsign
      • Grid
      • Check AutoGrid
      • Check Blank line between decoding periods
      • Check Tx messages to Rx frequency window
      • Check Show DXCC, grid and worked-before status
      • Check Double-click on call sets Tx enable
    • Radio
      • Rig: Yaesu FTDX-10
      • Serial Port: COM6
      • Baud Rate: 38400
      • Data Bits: Default
      • Stop Bits: Default
      • Handshake: Default
      • PTT Method: CAT
      • Mode: None
      • Split Operation: None
    • Audio
      • Input: Microphone USB AUDIO CODEC
      • Output: Speaker USB AUDIO CODEC
  • FTDX-10 Settings
    • Function Key
      • Radio Setting
        • Mode PSK/DATA
          • Data Mode Source: Rear
          • Rear Select: USB
          • Data Level: 50
          • RPort Gain: 10
          • HCUT FREQ: OFF
          • LCUT FREQ: OFF
          • Data Shift 0
    • Ensure RFilter is set to 3000